Rogue Jetson AGX Xavier Development System

REQUEST FOR QUOTEDATASHEET

Description

Jetson AGX Xavier Module

The new Jetson AGX Xavier module makes AI-powered autonomous machines possible, running in as little as 10W and delivering up to 32 TOPs. As part of the world’s leading AI computing platform, it benefits from NVIDIA’s rich set of AI tools and workflows, which enable developers to train and deploy neural networks quickly. Jetson AGX Xavier is supported by the NVIDIA JetPack SDK, which can help you save big by reducing development effort and expense.

Connect Tech Rogue Carrier

Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm.

The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector.

Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces.

Key Features

  • Commercially deployable NVIDIA® Jetson AGX Xavier™ platform
  • 6x 2-lane or 4x 4-lane MIPI CSI Camera Inputs
  • 2x NVMe M.2 Key M Slots, 3x USB 3.1, 2x GbE
  • Wide input power range 9-19V DC
  • Dimensions: 92mm x 105mm (3.62″ x 4.13″)

Additional information

Compatibility

NVIDIA® Jetson AGX Xavier™

Networking

1 Port from PCIe PHY Controller, 1 Port from RGMII PHY Controller, 2x Gigabit Ethernet (8p8c RJ-45)

Display

2x HDMI 1.4a (Type-A vert RA)

Camera Inputs

6 x2 Lane MIPI CSI-2 or 4 x4 Lane MIPI CSI-2

USB

1x USB OTG (Micro-AB), 3x USB 3.1 Ports (Type-C)

Storage

1 x Micro SD, 2x NVMe M.2 Key M Slots

UART

2x @ 3.3V levels UART0 and UART1

I2C/SPI

1x I2C Channel @ 3.3V IO, 1x SPI Channel @ 3.3V IO

CAN Bus

2 x CAN 2.0b Port

GPIO

4 bits of 3.3V (level shifted GPIO)

User Expansion

1 x M.2 Key E Slot with PCIe & USB (WiFi + BT modules)

Power Requirement

Wide Input 9-19V DC

RTC Battery

3-pin Picoblade connector to accept CTI battery cable assembly

Dimension

92mm x 105mm

Operating Temperature

-40°C to +85°C

Brand

Connect Tech

Jetson AGX Xavier Module Datasheet

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Rogue Carrier Spec Sheet

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Users Guide

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Title

Go to Top