AUVIDEA JNX30D Carrier (Jetson Nano, Xavier NX, TX2 NX)
Description
JNX30D carrier board has been designed for the Jetson Xavier NX primarily, but it also supports the TX2 NX and Nano compute modules. A 5V 8A on-board power converter supports the high power modes of the Xavier NX.
Key Features
- Easy integration into passively cooled systems
- Optionally available as complete system in passively cooled enclosure
- Easy flashing: just connect a USB OTG cable (Auto Flash)
- High performance storage: M.2 NVME PCIe x4
Additional information
| Power Requirement | 6V-19V |
|---|---|
| Xavier NX powering | 5V 8A power supply (over current LED) |
| DP | no |
| HDMI | standard HDMI connector (2.0) |
| FAN connector | yes |
| M.2 Key E | only with external module (using internal USB) |
| micro SD | yes |
| M.2 NVME Key M | yes |
| CAN | RX and TX (requires CAN transceiver) |
| USB 3.0 | 1x USB 3.0/3.1 (native – full performance) |
| micro USB | 1x micro USB (device or host mode) |
| Auto Flashing | yes (plug in host cable and flash) |
| USB 2.0 | USB 2.0 (JST-GH) |
| Ethernet | Gigabit RJ45 (2 LEDs) |
| PoE | yes – P11 |
| CSI Camera | 2x CSI-2 (4 lanes) plus camera LED (hardware sync available) |
| UART | 2x (J14 and 40 pin GPIO header) |
| I2C/SPI | 2x (40 pin header) |
| GPIO | 3x in + 3x out (40 pin header) (5V tolerant, unidirectional) |
Brand
Auvidea
