TX2 Inference Server
Description
Developed in partnership with USES Integrated Solutions, the TX2 Inference Server is an extremely low wattage, high performance deep learning inference server powered by the NVIDIA Jetson platform. Housed in a compact 1U chassis, the TX2 Inference Server can be outfitted with up to 24x NVIDIA Jetson TX2 modules. Within the Server, three processor module carriers house up to eight Jetson TX2 modules each, and are all connected via a Gigabit Ethernet fabric through a specialized Managed Ethernet Switch developed by Connect Tech with 10G uplink capability (XDG201).
The TX2 Inference Server includes Out of Band Management (OOBM) via an ARM-based SMARC module to control and monitor each of the Jetson TX2 modules. The OOBM not only monitors the health/boot of each module, but also remotely hard power (on/off) them individually.
Key Features
- 24x 1 TFLOPS, 6,144 GPU CUDA cores with NVIDIA® Pascal™ architecture
- 2x 10G SFP+, 2x 1G SFP uplink capability
- 3x 2.5″ SATA drives
- 1U ATX style redundant power supply
- Operating Temperature: 0°C to +60°C (+32°F to +140°F)
Additional information
| Processing Modules | 24x NVIDIA® Jetson™ TX2, CPU: 4x 64-bit ARM® A57 CPUs, GPU: 1 TFLOP/s 256-core with NVIDIA® Pascal™ architecture, Memory: 4GB LPDDR4, 25.6 GB/s, Storage: 16GB eMMC |
|---|---|
| Processor Module Carriers | 3x module carriers can be installed in the system for a total of 24 modules, Each Module Carrier will allow up to 8 x NVIDIA TX2 modules to be installed |
| Management Module | ARM Based OOBM, Enabling Serial console access, power status monitoring, and power control (ON/OFF) to all 24 x TX2 modules, OOBM accessible via Ethernet or via its own integrated USB-to-Serial console |
| Internal Storage | Up to 3 x 2.5” SATA Hard Drives (6TB Total) |
| Array Communication | 24x Gigabit Ethernet / 1000BASE-T / IEEE 802.3ab channels, All TX2 modules can communicate to all other TX2 modules |
| Embedded Ethernet Switch | CPU: 500 MHz MIPS 24KEc, Memory: 4Gb DDR3 SDRAM, Multi 1G/10G uplinks, with 24 1G downstream module connections, Storage: 128Mb Serial NOR Flash, Vitesse/Microsemi VSC7448 Managed Ethernet Switch Engine |
| External Uplink Connections | 2 x SFP 1G uplinks, 2 x SFP+ 10G uplink |
| Misc Interfaces | 1 x 1GbE OOB management port via RJ-45 |
| Cooling | Fans: Delta, 8x 40 x 40 x 28mm, 29 CFM / 2,400 in H2O static pressure, Forced convection via fans on front and rear of system, Passive heatsinks installed on each TX2 module |
| Operating Temperature | 0°C to +60°C |
Brand
Connect Tech
TX2 Inference Server Spec Sheet
Loading...
Reload document 
Open in new tab 
