Compact Carrier Board Compatible with Orin Nano / Orin NX
JNX42-M2 Jetson Orin NX 16GB Ready-to-Use AI Kit
Out of stock
Brand
Auvidea
Carrier Board Specifications
| Module Compatibility | Nano/ TX2 NX/ Xavier NX/ Orin Nano/ Orin NX |
| Orin Nano/NX | 3x (native) USB 3.0 |
| HDMI | HDMI 2.0 (4kp60) |
| UART | 2x (1x when LTE module is used) |
| SPI | 1x (1.8V) |
| I2C | 3x (3.3V) |
| I2S | 1x (1.8V) |
| CAN | 1x (with TJA1051 transceiver) |
| Buttons | PWR/ Force Recovery/ Reset |
| MIPI CSI-2 | 2x CSI-2 (22 pin- 4 lane) |
| Ethernet | Gigabit RJ45 |
| MCU | Yes |
| Micro USB | OTG |
| USB2 | 2x type A |
| USB3 | With Xavier NX |
| M.2 Key B | For LTE |
| M.2 Key E | Xavier NX: USB 2.0 module Orin NX: PCIe x1 & USB 2.0 module |
| M.2 NVME Key M | PCIe x4 for NVME SSD |
| Fan Connector | Yes |
| PoE | Optional |
| Power | 12V |
| CM power | 5V |
| Dimensions | 80x104.6mm |
Jetson Orin NX Datasheet
JNX42 Datasheet
What’s in the Box
- Jetson Orin NX 16GB Module
- JNX42-M2 Carrier Board
- Jetson Orin NX Active Heatsink
- 12V/3A Power Adapter(Optional)
Setup
You can access the installation file shared by the board manufacturer via the pdf below.
If you would like the installation and testing of the product to be performed by OpenZeka engineers, you can select the BSP Installation Service when purchasing the product. If you did not select the installation service at the time of purchase but are unable to complete the installation afterward, you can purchase the post-sales installation service. For this service, please email [email protected].
