X221-AI NVIDIA Jetson AGX Xavier 32GB AI Kit
Out of stock
SKU: X221AI-JAX-KIT
Category: Ready-to-Use AI Kits
Tags: Auvidea AI Kits, Jetson AGX Xavier, Jetson AGX Xavier Ready-to-Use AI Kits
- Brand
- Carrier Board Specifications
- X221-AI Technical Reference Manual
- Jetson AGX Xavier Module DataSheet
- Setup
- Resources
Brand
Auvidea
Carrier Board Specifications
| Module Compatibility | NVIDIA Jetson AGX Xavier |
| 2x GbE (RJ45) | 2x RTL8111 PCIe to GbE |
| HDMI | 1x |
| USB 2.0 | 4x |
| USB 3.0 | 2x |
| LM823 Wifi | 2x (optional) |
| Security MCU | Yes |
| Standard MCU | - |
| Remote power control, debugging via LTE | Yes |
| MicroSD/UFS | 1x |
| UART | 3x |
| I2S | 2x |
| I2C | 2x |
| Expansion port for PCIe x4/x1/USB/UART/I2C/GPIO | Yes |
| Expansion port for CSI-2 | 4-8x (optional) |
| Operating Voltage | 12-48V |
| Jetson Power Mode | 30W |
| UPS | Optional |
| Power output (5V, 12V) | Yes |
| Power, Reset, Recovery Buttons | Yes |
| RTC | 200mF |
| Auto flash | Yes |
| CAN (RX/TX) | 1x |
| Debug Port | Yes |
| Fan connector | 1x |
| RGB LED | 1x |
| Reverse voltage protection (low voltage drop MOSFET) | Yes |
| Overvoltage protection | Yes |
| Rechargeable lithium cell | Optional |
| Crypto authentication chip | Yes |
X221-AI Technical Reference Manual
Jetson AGX Xavier Module DataSheet
Setup
You can access the setup files provided by the board manufacturer below.
If you would like the product setup and testing to be carried out by OpenZeka engineers, you can select the setup service when purchasing the product. Customers who did not select the setup service at the time of purchase and were unable to complete the setup afterwards can purchase the after-sales setup service. For this service, please send an email to [email protected].
