Connect Tech Rogue Carrier (NVIDIA Jetson AGX Xavier)
Description
Connect Tech’s Rogue is a full featured Carrier Board for the NVIDIA® Jetson AGX Xavier™ module. This carrier board for Jetson AGX Xavier is specifically designed for commercially deployable platforms, and has an extremely small footprint of 92 x 105mm.
The Rogue provides access to an impressive list of latest generation interfaces on the Jetson AGX Xavier while adding additional interfaces of 3x USB 3.1, 2x GbE, 2x HDMI and a locking Mini-Fit Jr. power input connector.
Rugged camera add-on expansion boards will also be available for use with the Rogue to interface directly with the Jetson AGX Xavier high density MIPI CSI interfaces.
Key Features
- Commercially deployable NVIDIA® Jetson AGX Xavier™ platform
- 6x 2-lane or 4x 4-lane MIPI CSI Camera Inputs
- 2x NVMe M.2 Key M Slots, 3x USB 3.1, 2x GbE
- Wide input power range 9-19V DC
- Dimensions: 92mm x 105mm (3.62″ x 4.13″)
Additional information
| Compatibility | NVIDIA® Jetson AGX Xavier™ |
|---|---|
| Networking | 1 Port from PCIe PHY Controller, 1 Port from RGMII PHY Controller, 2x Gigabit Ethernet (8p8c RJ-45) |
| Display | 2x HDMI 1.4a (Type-A vert RA) |
| Camera Inputs | 6 x2 Lane MIPI CSI-2 or 4 x4 Lane MIPI CSI-2 |
| USB | 1x USB OTG (Micro-AB), 3x USB 3.1 Ports (Type-C) |
| Storage | 1 x Micro SD, 2x NVMe M.2 Key M Slots |
| UART | 2x @ 3.3V levels UART0 and UART1 |
| I2C/SPI | 1x I2C Channel @ 3.3V IO, 1x SPI Channel @ 3.3V IO |
| CAN Bus | 2 x CAN 2.0b Port |
| GPIO | 4 bits of 3.3V (level shifted GPIO) |
| User Expansion | 1 x M.2 Key E Slot with PCIe & USB (WiFi + BT modules) |
| Power Requirement | Wide Input 9-19V DC |
| RTC Battery | 3-pin Picoblade connector to accept CTI battery cable assembly |
| Dimension | 92mm x 105mm |
| Operating Temperature | -40°C to +85°C |
Brand
Connect Tech
Rogue Carrier Spec Sheet
Loading...
Reload document 
Open in new tab Users Guide
Loading...
