JNX30D NVIDIA® Jetson Nano™ Ready-to-Use AI Kit
- Description
- Brand
- Carrier Board Specifications
- Technical Reference Manual
- Jetson Nano Module Datasheet
- What's in the Box
- Setup
- Resources
Description
These systems let you dive into AI with ease. They allow you to explore AI applications like people detection, face masking and more. The full suite of NVIDIA SDKs may be installed. At your choice these systems can be equipped with the entire family of NVIDIA compute modules with the SO-DIMM form factor.
The JNX30D features an industrial strength design and is commercially deployable in any volume.
Brand
Auvidea
Carrier Board Specifications
| Power | 6V - 19V (5.5/2.5 mm connector) |
| NX Power | 5V 8A power supply |
| DP | No |
| HDMI | standard HDMI connector (2.0) |
| Fan Connector | Yes |
| M.2 NVME Key M | Yes |
| Micro SD Card | Yes |
| M.2 Key E | only with external module (using internal USB - J8) |
| CAN RX / TX | Yes |
| USB 3.0 | 1x USB 3.1 |
| Micro USB | 1x Micro USB (host and device mode) |
| Auto flash | Yes. (Plug in the host cable and flash.) |
| USB 2.0 | 1x USB 2.0 (JST-GH, J8) |
| Ethernet | Gigabit RJ45 (one LED) |
| PoE option | Yes- P11 |
| CSI | 2x CSI-2 (4 lanes) plus camera LED (hardware synchronization available). |
| UART | 2x (J14 and 40-pin GPIO header) |
| I2C | 2x (40-pin header) |
| I2S | 1x (40-pin header) (5V tolerant, unidirectional) |
| SPI | 2x (40-pin header) (5V tolerant, unidirectional) |
| GPIO | 3x input + 3x output (40-pin header) (5V tolerant, unidirectional) |
Technical Reference Manual
Jetson Nano Module Datasheet
What's in the Box
- Jetson Nano Module
- JNX30D Carrier
- Passive Heatsink Kit for Jetson Nano Module
- 12V/2A Power Adapter (Optional)
Setup
You can access the setup file provided by the board manufacturer via the link below.
If you would like the product setup and testing to be carried out by OpenZeka engineers, you can select the BSP setup service when purchasing the product. Customers who did not select the setup service at the time of purchase and were unable to complete the setup afterwards can purchase the after-sales setup service. For this service, please send an email to [email protected].
