- Easy flashing (Auto Flash)
- High-performance storage: M.2 NVMe PCIe x4
JNX30D NVIDIA®Jetson Xavier NX 16GB AI Kit
Out of stock
SKU: JNX30D-JXNX-16GB-KIT
Category: Ready-to-Use AI Kits
Tags: Auvidea AI Kits, Jetson Xavier NX AI Kits, JNX30D Ready-to-Use AI Kit
- Brand
- Carrier Board Specifications
- JNX30D Datasheet
- Jetson Xavier NX Modül DataSheet
- What's in the Box
- Setup
- Resources
Brand
Auvidea
Carrier Board Specifications
| Power | 6V - 19V (5.5/2.5 mm connector) |
| NX Power | 5V 8A power supply |
| DP | No |
| HDMI | standard HDMI connector (2.0) |
| Fan Connector | Yes |
| M.2 NVME Key M | Yes |
| Micro SD Card | Yes |
| M.2 Key E | only with external module (using internal USB - J8) |
| CAN RX / TX | Yes |
| USB 3.0 | 1x USB 3.1 |
| Micro USB | 1x Micro USB (host and device mode) |
| Auto flash | Yes. (Plug in the host cable and flash.) |
| USB 2.0 | 1x USB 2.0 (JST-GH, J8) |
| Ethernet | Gigabit RJ45 (one LED) |
| PoE option | Yes- P11 |
| CSI | 2x CSI-2 (4 lanes) plus camera LED (hardware synchronization available). |
| UART | 2x (J14 and 40-pin GPIO header) |
| I2C | 2x (40-pin header) |
| I2S | 1x (40-pin header) (5V tolerant, unidirectional) |
| SPI | 2x (40-pin header) (5V tolerant, unidirectional) |
| GPIO | 3x input + 3x output (40-pin header) (5V tolerant, unidirectional) |
JNX30D Datasheet
Jetson Xavier NX Modül DataSheet
What's in the Box
- Jetson Xavier NX Module
- JNX30D Carrier Board
- Jetson Xavier NX Active Heatsink
- 12V/3A Power Adapter (Optional)
Setup
You can access the setup file provided by the board manufacturer via the link below.
If you would like the product setup and testing to be carried out by OpenZeka engineers, you can select the BSP setup service when purchasing the product. Customers who did not select the setup service at the time of purchase and were unable to complete the setup afterwards can purchase the after-sales setup service. For this service, please send an email to [email protected].
