- Compact carrier board compatible with Orin Nano / Orin NX
JNX42-M.2 Jetson Orin NX 16GB Ready-to-Use AI Kit
Out of stock
SKU: JNX42M2-ONX16GB-KIT
Category: Ready-to-Use AI Kits
Tags: Auvidea AI Kits, Generative AI, jetson orin nano, jetson orin nx, Jetson Orin NX AI Kits
- Brand
- Carrier Board Specifications
- JNX42 Datasheet
- Jetson Orin NX Datasheet
- What’s in the Box
- Setup
- Resources
Brand
Auvidea
Carrier Board Specifications
| Module Compatibility | Nano/ TX2 NX/ Xavier NX/ Orin Nano/ Orin NX |
| Orin Nano/NX | 3x (native) USB 3.0 |
| HDMI | HDMI 2.0 (4kp60) |
| UART | 2x (1x when LTE module is used) |
| SPI | 1x (1.8V) |
| I2C | 3x (3.3V) |
| I2S | 1x (1.8V) |
| CAN | 1x (with TJA1051 transceiver) |
| Buttons | PWR/ Force Recovery/ Reset |
| MIPI CSI-2 | 2x CSI-2 (22 pin- 4 lane) |
| Ethernet | Gigabit RJ45 |
| MCU | Yes |
| Micro USB | OTG |
| USB2 | 2x type A |
| USB3 | With Xavier NX |
| M.2 Key B | For LTE |
| M.2 Key E | Xavier NX: USB 2.0 module Orin NX: PCIe x1 & USB 2.0 module |
| M.2 NVME Key M | PCIe x4 for NVME SSD |
| Fan Connector | Yes |
| PoE | Optional |
| Power | 12V |
| CM power | 5V |
| Dimensions | 80x104.6mm |
JNX42 Datasheet
Jetson Orin NX Datasheet
What’s in the Box
- Jetson Orin NX 16GB Module
- JNX42-M2 Carrier Board
- Jetson Orin NX Active Heatsink
- 12V/3A Power Adapter (Optional)
Setup
You can access the setup file provided by the board manufacturer via the link below.
If you would like the product setup and testing to be carried out by OpenZeka engineers, you can select the BSP setup service when purchasing the product. Customers who did not select the setup service at the time of purchase and were unable to complete the setup afterwards can purchase the after-sales setup service. For this service, please send an email to [email protected].
